IPB - Fire lockers and lockers for rescue services

Lockers specially made for firefighters and rescue services.

It is a welded construction made of 1 mm thick sheet steel. The locker guarantees the immediate availability of emergency clothing whenever needed.

Metal grates can be equipped with feet (height 100 mm) and levelling screws. Lockers can be equipped with special tilting helmet holder for additional charge. By simply pulling on the helmet, the holder tilts down and is much easier to remove (see picture below).

More info

IPB
Air ventilation:	special ventilation between lockers (perforations in side panels) with a permeability of 80%
Height x width x depth (mm)	1780 x 400 x 500
Equipment	1 x lockable box, 1 x rod, 3 x steel clothes hooks, special air system between the lockers (perforation in side panels)
Weight net / gross (kg)	41/46
Order code:	IPB-18-A45-IIR-X2 - mechanical code lock
Order code:	IPB-18-A45-IIC-X2 - cylindrical lock

Photogallery

Photogallery of IPB - Fire lockers and lockers for rescue services

>> more photos

Maintenance

Recommended method of installation and maintenance of Tritón lockers

Recommended environment

intended for indoor use,
the locker is not intended for outdoor installations and for installations in environment that can negatively influence the functionality of the locker (humid or wet environment).

Must be protected from

mechanical damage,
improper handling,
a different usage than the locker is intended for.

Improper handling is especially

Interference with the construction and design of the locker.

Installation of the locker

The locker must be placed on a flat floor; any small unevenness will be compensated by levelling feet. We recommend fixing metal furniture to the wall.

Environment protection

All parts are made of recyclable materials and after decommissioning the locker, they must be disposed of according to relevant regulations.

Maintenance

It is recommended to wash the locker regularly with common non-abrasive detergents with a neutral pH (5-8) and then dry it thoroughly,
The manufacturer is not responsible for normal wear and tear of the product.