Data cabinets, Cloakroom equipment

Accessories - Power Distribution 230 V

Varistor protection is RAB-PD-X07-A1, RAB-PD-X08-A1 and RAB-PD-X51-X1 used in power distribution panels as 3rd step of overvoltage protection in compliance with appropriate norm, accordingly as a protection placed right in front of the device and eliminating the remanent voltage, which the previous steps of house wiring surge protection didn`t manage to break off. Installed surge protection is in form of detachable block, that can discharge the pulse overvoltage, which endangers the connected devices, into a protective earth conductor. Therefore it operates only on so-called three wire distribution system with yellow-green protective conductor. If the overvolage is really big, the surge protection module would get damaged and the control green light on the module would switch off. The power distrubution panel would be still working, however not protecting against the overvolate any more and it is necessary to change the surge protection module.

Surge protection - Varistor protection agains pulse overvoltage

Classification in compliance with norms:
ČSN EN 61643-11.......type 3
IEC 61643-1................class III
VDE 0675-6................class D

Surge protection protects the connected devices agains pulse overvoltage using varistors, which resistance falls with increasing voltage.

Scheme of surge protection used in power distribution panels RAB-PD-X07-A1, RAB-PD-X08-A1 a RAB-PD-X51-X1

Rating voltage Un 250VAC 50/60Hz
Maximum persist working voltage 300VAC
Standard discharge current (8/20μs) 5kA
Nominal discharge current (8/20 μs) 10kA
Residual voltage (8/20 μs) <1000V
Response time <25ns
Maximum working current 16A

Movie